MIDEA MAD20S1QWT User Manual
Page 15
Page 15
Oper
ating
Ins
tructions
•
Make sure the hose is secure so there are no leaks.
•
Direct the hose toward the drain, making sure that there are no kinks that will stop
the water flowing.
•
Place the end of the hose into the drain.
•
Select the desired humidity setting and fan speed on the unit for pump draining
to start.
•
When operating in Bucketless mode the pump cannot be used.
NOTICE
The pump operation light blinks when a failure occurs. Please turn off the unit and
disconnect the power cord. Check the following items:
• Cleaning the pump filter:
- Clean the pump filter following the instructions below.
• Check if the drain hose is clean and free of debris.
• Empty the water from the bucket.
• Check the hose connection and the bucket for proper fitment. If the error
persists, contact Customer Service.
NOTICE
If routing the drain hose outdoors, do not operate when the outdoor temperature
is at or below 32°F (0°C) as the water will freeze, blocking the hose and causing
the unit to stop.
Make sure to empty the bucket at least once a week a week when using the pump
draining feature. When the pump draining feature is not being used, remove the
pump drain hose from the outlet.