Lock, Refrigerator/freezer mode, Quick freeze – MIDEA 17.0 Cu. Ft. Upright Convertible User Manual
Page 13: Temp display (°f vs °c), Return to factory default settings
13
Fr
ee
z
er
Saf
ety
Oper
a
ting
R
equir
ements
P
arts and
F
ea
tur
es
Ins
talla
tion
Fr
ee
z
er
Use
Fr
ee
zer
Car
e
Tr
oubleshooting
Bef
or
e
Use
LOCK
To manually lock or unlock the control panel for use:
Press and hold
for 3 seconds.
NOTE:
Depending on the state of the Control Panel (locked or unlocked),
the Lock icon will either illuminate (locked) or turn off and a beep will
sound.
REFRIGERATOR/FREEZER MODE
This freezer has an advanced design feature that lets you change it from a
freezer to a refrigerator. You can switch from Freezer mode to Refrigerator
mode only by using the control panel.
The Freezer / Fridge light on the control panel indicates the current mode.
1.
Press and hold
for 3 seconds to unlock the control panel.
2.
Press and hold
for 3 seconds to change modes. The panel beeps
and the indicator light changes to the mode selected.
QUICK FREEZE
The Quick Freeze feature lowers the temperature below the normal
operating temperature to quickly freeze foods.
1.
Press and hold
for 3 seconds to unlock the control panel.
2.
Press
to select Quick Freeze mode. The blue snowflake icon
illuminates.
NOTE:
You can press
a second time to exit quick freeze mode.
The Quick Freeze mode turns off automatically:
•
After 3 hours, if the temperature falls below -13 °F (-25 °C).
•
After 24 hours, If the temperature does not fall below -13 °F (-25 °C).
TEMP DISPLAY (°F VS °C)
1.
Press and hold
for 3 seconds to unlock the control panel.
2.
Press and hold or for 3 seconds to switch between Fahrenheit
and Celsius.
RETURN TO FACTORY DEFAULT SETTINGS
1.
Press and hold
for 3 seconds to unlock the control panel.
2.
Press
and buttons at the same time for 3 seconds to reset the
freezer controls to the factory default settings.
NOTE:
The control panel will beep and all indicators will illuminate for
3 seconds. If the compressor is running, it will pause for 5 minutes, and
then restart.