MIDEA 18 cu. ft. French Door - Manual (Page 9)

09
EN
Leveling feet
To avoid vibration, the unit must be leveled.
If required, adjust the leveling screws to compensate for the uneven floor.
The front should be slightly higher than the rear to aid in door closing.
Leveling screws can be turned easily by tipping the cabinet slightly.
Turn the leveling screws counterclockwise
to raise the unit, clockwise to
lower it.
Leveling doors
List of tools to be provided by the user
Pliers
Parts included with the kit
Fastener-ring
1. Raise the lower door up to the level of the higher door.
2. Insert the supplied fastener-ring by using plier in the gap between the hinge-
grommet and the lower hinge. The number of fasten-rings you will need to
insert depends on the gap.
Moving the appliance
1. Remove all food from inside the appliance.
2.
Pull the power plug out, insert and fix it into the power plug hook at the rear or
on top of the appliance.
3. Tape parts such as shelves and the door handle to prevent from falling off
while moving the appliance.
4. Move the appliance with more than two people carefully. When transporting
the appliance over a long distance, keep the appliance upright.
5. After installing the appliance, connect the power plug into a socket out to
switch on the appliance.
Hinge
grommet Pliers
Fastener-ring
Lower hinge