Roborock E2 - Manual (Page 20)

18
Routine Maintenance
3. Remove the filter and rinse with water
4. Rinse repeatedly and lightly pat the filter to remove any dirt.
Continue until it is clean
5. Dry the filter thoroughly and reinstall it before use
Note: Do not touch the surface of the filter with hands, brushes or sharp
objects so as to avoid damaging the filter
Note:
Always dry the filter thoroughly before use (dry for at least 24 hours)
It is recommended to alternate between two strainers
Note: flush it with tap water and reinstall after drying
1. Flip the machine over and lift the omni-directional wheel up
2. Remove hair and dirt on the wheel body and axle
3. Reinstall the wheel body and press tightly
Omni-directional wheel
Clean monthly
Wheel body
Axle
Rack
Side brush Clean monthly
1. Flip the machine over to remove the fixing screw on the side brush
2. Remove and clean the side brush
3. Reinstall the side brush and tighten the screw
Note: It is recommended to replace the side brush every 3-6 months
to ensure the cleaning effect
*
*