Emerson Radio PD5100 - Manual (Page 15)

1 4
PROGRAMMED PLAYBACK
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the Stop button to stop playback before you begin the programming steps
below.
1.) Move the AM/FM/CD/OFF function selector to CD
position, insert your disc in the player, close the door,
and wait until the total track number appears in the
display.
2.) Press the PROGRAM button once. The Program
number “01” begins flashing in the display.
3.) Use the / buttons to select the first track to be
programmed. (Example: Track # 8).
4.) When track number “8” appears in the display, press
the PROGRAM button once again to enter the track “8”
in program memory number “01”. Track number “8”
disappears and the Program number advances to
flashing “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROGRAM button
again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
PD5100_072705.p65 27/7/2005, 16:12 14