Remote controller – Pioneer X-HM76 User Manual
Page 8
> Install
> Playback
7
E
N
Remote Controller
1. Í STANDBY/ON button: Turns the unit on or into standby mode.
2. TIMER button: Used to set the time and set the alarm.
3. SLEEP button: Set the sleep timer. When the time set (30, 60, or 90 minutes) has
elapsed, the unit switches to standby. If SLEEP button is pressed after setting, the time
remaining until sleep is displayed.
4. INPUT SELECTOR buttons: Switches the input to be played.
5. Play buttons:
:
: Return to the beginning of the track being played. (CD)
Move to the track before the one being played. (USB, Music Server)
X/;: Play or pause play.
9: Move to the next track.
22
: Rewind the track quickly. (CD only)
∫: Stop playback.
11
: Fast-forward the track. (CD only)
0 Depending on the input, the operation may not start.
PRESET i/j buttons: Used to select stations that have been registered or to give names
to stations.
TUNE i/j buttons: Used to select radio stations.
6. MEMORY button: Used to register favorite radio stations.
7. SHUFFLE/REPEAT button: Set repeat play and shuffle play.
8. MODE button: Used for program play of CDs.
9. Cursors, ENTER button: Select the item with the cursors and press ENTER to confirm.
10.SETUP button: Displays the Setup menu.
11. VOLUME i/j buttons: Adjust the volume. Adjust between 0 and 50.
12.SOUND button: Adjust the sound quality.
13.DIMMER button: Switch the display off or adjust the brightness of the display in three
steps.
14.CLEAR button: Used when entering text, etc.
15.
(NOW PLAYING) button: Switches the information on the
display.
16.RETURN button: Returns the display to the previous state.
17.MUTE button: Temporarily mutes audio. Press again to cancel
muting.
30°
30°
Approx.7 m