Parrot Skycontroller - Manual (Page 9)

9 Before starting
the Parrot Skycontroller.
3. Press Manager Wi-Fi . For further information about the use of FPV glasses, see
Using FPV glasses .
4. Select your Parrot Bebop Drone.
> A pop-up asks you to connect your Parrot Bebop Drone.
5. Press OK .
> A signal tone indicates that the Parrot Bebop Drone is connected to the Parrot
Skycontroller. The Parrot Bebop Drone battery leds and the Wi-Fi leds light up. The
Parrot Bebop Drone is ready to be piloted with the Parrot Skycontroller.
Note: If the FreeFlight 3 main screen does not display the Parrot Bebop Drone video
feedback, press , then select the Parrot Bebop Drone.
Displaying a video feedback
You can display the Parrot Bebop Drone video feedback on:
your smartphone via the FreeFlight 3 application;
FVP (First Person View) glasses via HDMI cable.
To display a video feedback on your smartphone:
1. Switch the Parrot Skycontroller and the Parrot Bebop Drone on.
2. Search for available Wi-Fi® networks on your device:
If you are using an iPhone® or an iPad®, go to Settings> Wi-Fi
If you are using an Android TM smartphone, go to Settings > Wireless and
networks > Wi-Fi .
3. Select the Skycontroller_xxxxx network. Wait for your smartphone to connect to
the Parrot Skycontroller Wi-Fi network. The Wi-Fi symbol will usually appear on
your smartphone when connection is complete.
4. Launch the FreeFlight 3 application.
> The Parrot Bebop Drone connects to the Parrot Skycontroller automatically.
To display a video feedback on your FPV glasses:
Note: You can display a video feedback on any screen with a HDMI port.
1. Plug the HDMI cable of your FPV glasses on the HDMI port located on the left side
of the Parrot Skycontroller.
2. Switch the Parrot Skycontroller, the Parrot Bebop Drone, and the FVP glasses on.