12 the setting tab – Avision AD250F User Manual

Page 104

User’s Manual

4-68

4.12 The Setting Tab

The Setting tab allows you to set the following settings:

The Setting tab dialog box

Energy Saving

Control

Check the Enable Energy Saver box

and move the slider to set the amount

of time to start the energy saver after

your last action. The range is from 1 to

242 minutes. The default value is 15

minutes.

Enable Power

Off

Check the Enable Power Off box and

move the slider to set the amount of

time to automatically turn off the

scanner after your last action. The

range is from 1 to 480 minutes. The

default is 242 minutes (4 hours). Note

the value of “Power Off” has to be

greater than or equal to the value of

“Energy Saving”.