Emerson Radio ES28 User Manual
Page 17
16
5.) If the REPEAT / MEMORY UP button is pressed once more, the “REPEAT”
indicator will disappear and, repeat play will end. Normal disc play will resume
from that point.
6.) When the last track has finished playing, the CD player will then Stop.
PROGRAMMED DISC PLAY
• It is possible to program the tracks you wish to play in a sequence of your choice.
It is not possible to enter program a disc during playback. Press the STOP
button first, then follow the instructions below.
• It is easier to use the remote control for the following settings, however you may
also use the controls on the main unit if desired.
ENTERING A PROGRAM
1.) Press the PROG / MEMORY button.
“TRACK MEMORY” flashes and “P-01”
will be displayed on the display.
2.) Select the first desired track using the Forward
and Reverse
Skip
buttons.
3.) Press the PROG / MEMORY button. The
first program selection is now stored in
the program memory. The display will
now show “P-02”.
4.) Select the next desired track using the Forward
and Reverse
Skip
Buttons.
5.) Press the PROG / MEMORY button. Continue entering tracks in this way until
all the desired tracks are stored (up to 20 tracks).
NOTES:
• If the PLAY / PAUSE
button is pressed before the PROG / MEMORY button
is pressed to store a track, the track will not be programmed, and the disc will
start playing from the first selected track.
POP
TRACK MEMORY
POP
TRACK MEMORY
ES28_ib_0321.p65
21/3/2002, 11:10
16