Getting started, Installing the base, Selecting a suitable location – Elo TouchSystems 2125C Series User Manual
Page 10

2-4
E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e
Getting Started
Installing the Base
• Carefully turn the touchmonitor upside-down.
• Place the base against the bottom of the monitor so that the base fasteners are
aligned with appropriate slots.
• Push the base towards the front of the monitor until the latch locks into
position.
• Carefully turn the touchmonitor right-side up.
Selecting a Suitable Location
• Place the monitor at least 12 inches from other electrical or heat-emitting
equipment and allow at least 4 inches on each side for ventilation.
• Place the monitor in a position where no light shines or is reflected directly
on the screen.
• To reduce eye strain, avoid installing the display unit against a bright
background such as a window.
• Position the monitor so the top of the screen is no higher than eye level.
• Position the monitor directly in front of you at a comfortable reading
distance.