Esoteric AZ-1 - Manual (Page 14)

14
SETUP INPUT
Basic Settings
< If you leave the unit idle for 10 seconds, the setup mode will
be cancelled.
Repeatedly press the SETUP button to select the menu
item to be changed. 1
Turn the INPUT knob to select the options within the
menu item. 2
Repeatedly press the SETUP button (or leave the unit
idle for 10 seconds) to exit the setup mode. 3
< Settings are stored even when power is turned off and the
unit is unplugged. If left unplugged for an extended period,
the settings may be lost.
< Repeat steps and as required. 2 1
This feature is used when you want to get your whole system
locked to a single sync signal (clock) by connecting this unit to
the Esoteric SZ-1/UZ-1 or other devices that are capable of
inputting a sync signal (word clock).
Use the WORD button to switch between W_OUT and
WORD OFF.
W_OUT
The unit internally generates and sends out Word Clock.
The indicator lights.
You can change the frequency of the word sync signal. See
pages 14 and 15 for details.
< Make WORD SYNC connections before powering on the unit.
< It takes several seconds to detect and lock to a clock.
If the received digital signal doesn’t match the sync signal, the
display shows “WRD ERROR!”.
WORD OFF
The unit does not output a word clock.
Word sync