Electrolux 297122900 (0608) - Manual (Page 10)

10
Freezer Features
INTERIOR LIGHTING
The light comes on automatically when the door is opened.
The light bulb assembly is located on the back of the
freezer control box. To replace the light bulb, turn the
temperature control to "OFF" and unplug the electrical cord.
Replace the old bulb with a bulb of the same type and
wattage.
Mid Level Lighting
The mid level lighting is located at the back of the crispers.
The lights come on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical cord. Remove the lens from
the lamp housing by unsnapping it from the
lamp housing using your fingers or a
screwdriver. Be careful not to break the
locking tabs on the lamp housing. Replace the
old bulb with a bulb of the same type and
wattage. To replace the lens, snap one side of
the lens opening to the tab on the lamp
housing. Then carefully attach the other side.
To Remove Light Lens
Press Tabs
in Direction Shown.
Mid Level Lighting