Front panel lights and controls – EdgeStar AP14009COM User Manual

Page 17

EdgeStar Portable Air Conditioner

The timer can be used to either turn the unit on or off after a number of
elapsed hours. The timer is adjustable between 1-24 hours in one hour
increments.

How to set the unit to automatically turn on

1) Press the

Timer button while the unit and remote are powered

off. The On Timer [

] indicator will be selected and the timed hour

indicator will be blinking.
2) Use the

Up and

Down buttons to set the number of hours

you want to pass before the unit turns on.
3) Press the

Timer button again to set the timer. The timed hour

indicator will stop blinking. After the selected time passes, the unit will
automatically turn on.

How to set the unit to automatically turn off

1) Press the

Timer button while the unit and remote are powered

on. The Off Timer [

] indicator will be selected and the timed hour

indicator will be blinking.
2) Use the

Up and

Down buttons to set the number of hours.

3) Press the

Timer button again to set the timer. The timed hour

indicator will stop blinking. The unit will automatically turn off after the
selected time elapses.

Front Panel Lights and Controls

Your portable air conditioner has a front panel that lights up different
colors depending on the mode it is running.

Cooling mode will display a blue light.
Dehumidify mode will display a yellow light.
Fan mode will display a green light.
Heating mode (on some models) will display a red light.
Automatic mode will display the color of the current mode.

If the unit flashes a red light and the unit stops cooling, this indicates that
the internal water reservoir is full. Place a pan under the unit, and remove
the drain plug to drain the unit.

If the lights flash from left to right and the unit does not work, contact
customer service.

The front panel has an emergency power switch. The power switch
can be used when the unit needs to be shut off or turned on without

the remote control.

You can turn off the front panel lights by hitting the Lamp Off switch.

Timer

Front Panel Lights

Front Panel Controls

NOTE: To cancel the timer,
press

Power button or

set it at “00”.