OPHIT DPM - Manual (Page 5)

Installation
www.ophit.com
Specifications
Installation
1. Connect the ‘Transmitter’ side of connector to source device.
2. Connect the ‘Receiver’ side of connector to display device.
(Before connect to display, enclosed 30cm(1feet) DisplayPort
copper cable should be connected to the end of connector)
 Connector : Transmitter - 20 pin DisplayPort Plug (Male)
Receiver - 20 pin DisplayPort Plug (Female)
 Video Bandwidth : 10 bit Deep color / 60Hz
 Supporting Resolution : Up to WQXGA(2560X1600)
 Supporting distance : Up to 65M (215Ft)
 Compliant : Standard DispalyPort V1.1a
• Power consumption : Tx-0.4W, Rx-0.7W
 Bending Radius : 70mm
 Environment
- Operating Temperature Range : 0 to 50°C
- Storage Temperature Range : -20 to 70°C
4