Precaution, Installation, Specifications – OPHIT HDMB User Manual
Page 6

Precaution
WARNING
•
Do not dismantle the housing or modify the product.
Dismantling the housing or modifying the product may result
in electrical shock or burn.
•
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening
or removing housing may expose you to dangerous voltage
or other hazards.
•
Keep the product away from liquids.
Spilling into the housing may result in fire electrical shock
Spilling into the housing may result in fire, electrical shock,
or equipment damage. If an object or liquid falls/spills into
the housing, unplug the product immediately.
Have the product checked by a qualified service engineer
before using it again.
D
t t
h th P d t ith
t h d
•
Do not touch the Product with wet hands.
Touching the housing and plug with wet hands is dangerous
and can cause electrical shock.
ZZZRSKLWFRP
Installation
1. Connect the ‘Source’ side of connector to source device.
2. Connect the ‘Display’ side of connector to display device.
(Before connect to display, enclosed 30cm(1feet) HDMI copper
cable should be connected to the end of connector)
3. If the display is not active after power on, please insert the
enclosed power adapter into the transmitter of the HDMB.
Specifications
• Connector : 1 HDMI A Type 19Pin
• Video Bandwidth : 2.25Gbps Deep color
• Supporting Resolution : Up to WUXGA(1920X1200), 1080p
• Supporting distance : Up to 100M (330Ft)
• Compliant : Standard HDMI 1.3
Standard DVI 1.0
HDCP Rev 1.1
• Power consumption : Tx-0.8W, Rx-1.05W
•
Bending Radius : 70mm
• Environment
- Operating Temperature Range : 0 to 50C
- Storage Temperature Range : -20 to 70C
ZZZRSKLWFRP
g
p
g
Installation
DAU.indd 5
2009-06-18 �� 9:38:31