Mpman RPS700 - Manual (Page 3)

Condensation
Moisture may form in the following conditions:
- Immediately after a heater has been turned on in a steamy or very humid room.
- When the unit is suddenly moved from a cold environment to a warm one.
If moisture forms inside the unit it may not operate properly. In this case turn on the power and wait about
one hour for the moisture to evaporate
DESCRIPTION
1. ANTENNA
2. LCD DISPLAY
3. MODE BUTTON
4. TUNING KNOB (TUNE+ / TUNE-)
5. SET BUTTON
6. RADIO ON / OFF BUTTON
7. PHONE JACK
8. VOLUME KNOB
9. ALARM 2 BUTTON
10. M- (MEMORY-) BUTTON
11. ALARM 1 BUTTON
12. M+ (MEMORY+) BUTTON
13. SNOOZE / SLEEP BUTTON
14. AM/FM BUTTON
15. BATTERY COMPARTMENT
16. SPEAKER
17. AC POWER OUTLET
18. HANDLE
THE NORMAL FUNCTION OF THE PRODUCT MAYBE DISTURBED BY STRONG ELECTRO
MAGNETIC INTERFERENCE. IF SO, SIMPLY RESET THE PRODUCT BY DISCONNECTING THE AC
PLUG TO RESUME NORMAL. IN CASE THE FUNCTION COULD NOT RESUME, PLEASE USE THE
PRODUCT IN OTHER LOCATION.
POWER OPERATION
THIS UNIT CAN BE OPERATION FOR BOTH AC 230V / 50HZ AND 4 X “AA” BATTERY (“AA”
BATTERY NOT INCLUDED). WHEN PLAYING THE UNIT BY BATTERIES, PLEASE DISCONNECT
THE AC POWER CORD FROM THE RADIO UNIT, THEN REMOVE THE POWER CORD FROM AC
POWER SOCKET (17). PLEASE MAKE SURE THE POWER IS OFF, WHEN YOU DISCONNECT THE
POWER CORD FROM THE RADIO UNIT. IF YOU FORGET THE TURN OFF THE POWER WHEN YOU
DISCONNECT THE POWER CORD, THE ELECTRICITY CURRENT WILL REMAIN IN LCD DISPLAY.
CONNECTING THE RADIO
PLUG THE AC CORD INTO THE AC POWER SOCKET (17). THEN PLUG THE ANOTHER END INTO
THE AC OUTLET. WHEN ELECTRICAL POWER HAS BEEN INTERRUPTED AND RESTORED, THE
CLOCK DISPLAY (2) WILL DEFAULT THE CALENDAR AS 1 JANUARY 2009 12:00AM.
LCD BACKLIGHT
LCD BACKLIGHT WILL TURN ON BY PRESSING ANY BUTTON OF THE UNIT, THE BACKLIGHT WILL
TURN OFF AUTOMATICALLY AFTER 5 SECONDS.
TIME SETTING
PRESS THE SET BUTTON (5) ONCE, THEN SWITCH TUNE +/- KNOB TO SET THE CORRECT
MINUTE. ONCE THE MINUTE IS SET, PRESS THE SET BUTTON (5) ONCE AGAIN, SWITCH TUNE +/-
KNOB TO SET THE CORRECT HOUR. PRESS THE SET BUTTON ONCE AGAIN, SWITCH TUNE+ / -
KNOB (4) TO SELECT 12 / 24 CLOCK DISPLAY FORMAT. KEEP SWITCHING THE TUNE+/- KNOB (4)
THE TIME WILL ADVANCE FAST TUNING. IT WILL RETURN TO THE CLOCK MODE
AUTOMATICALLY IF NO BUTTON IS PRESSED WITHIN 15 SECONDS.
CALENDAR SETTING
WHEN LCD DISPLAY SHOWS THE TIME, PRESS MODE BUTTON (3) ONCE, IT WILL SHOW
CALENDAR MODE. PRESS SET BUTTON (5) ONCE TO ADJUST THE DATE, SWITCH TUNE+/-
KNOB (4) TO SET THE CORRECT DATE. PRESS SET BUTTON (5) AGAIN TO ADJUST THE MONTH,
SWITCH TUNE +/- KNOB (4) TO SET THE MONTH. THEN PRESS SET BUTTON (5) AGAIN TO
ADJUST THE YEAR, SWITCH TUNE+/- KNOB (4) TO SET THE YEAR. IT WILL RETURN TO THE
CLOCK MODE AUTOMATICALLY IF NO BUTTON IS PRESSED WITHIN 15 SECONDS.
English
148mm
210mm
EN-2