Escali C3315 - Manual (Page 4)

4
(B). Unit weight of item is known
1. Turn on the scale.
2. Input the unit weight of the samples.
3. Press
“ UNIT WGT” key. The unit weight of the sample is stored in the scale.
COUNTING
1. The scale is powered on
2. Put objects on the scale platform
3. Press
“ UNIT WGT ” key.
4. The quantity of the objects will be shown on the TOTAL (PCS) display.
ACCUMULATE COUNTING
:
1. Repeat
COUNTING procedures above (1) to (4).
2. Press “ M+ ” key.
3. The ‘UNIT WEIGHT” display will show followed by .
4. After 2 seconds, the scale will return to the counting model