Amprobe TIC300CC TIC-Tracer - Manual (Page 12)

MAINTENANCE
No normal maintenance apart from battery replacement is necessary
with your Amprobe Tic Tracer. Replace the battery when no signal is
heard when the instrument is switched ON.
Battery Replacement
1. Slide the small latch on the top of the battery compartment
downward.
2. Tilt out and remove the battery cover.
3. If applicable, disconnect old battery from the connector.
4. Connect a new, and/or tested, 9V battery to the connector,
and replace in compartment.
5. Replace cover and move latch upwards to secure.
SPECIFICATIONS
Power Supply: 9 VDC battery
Voltage Detection Range:
TIC 300CC 30 to 1500 VAC
TIC 300HV Low – 30 to 1500 VAC
High – 1500 to 122,000 VAC *
*Use only with proper safety equipment and Hot Stick Amprobe
Model TIC 410A for voltages up to 122kV.
Operating Temperature Range: 32°F to 125°F (0°C to 52°C)
Battery Life: Approximate Battery shelf life
Duty Cycle: Continuous
Response Time: Instantaneous
Dimensions: 8.5 x 2.8 x 1 inches (21.6 x 7 x 2.5 cm)
Weight: 5 ounces (140 gr)
8