Amprobe VPC-10N Voltage-Continuity-Tester - Manual (Page 2)

SPECIFICATIONS
Function: Range: Accuracy:
AC voltage (V) 24,120,208,240,277,480,600 -30% to 0% of reading
DC voltage (V) 6,12,24,36,48,110,220 -30% to 0% of reading
Continuity Test: Audible threshold 0-85kW, Continuity beeper
2KHz
Maximum Voltage Between any Terminal and Earth Ground:
600V DC; 600V AC RMS, Overvoltage Category III
Input Impedance: 1MW
Non-contact AC Voltage Sensitivity: 100 to 600V (50/60 Hz)
Non-contact AC Voltage detection distance: <0.5” of NCV
sensor
Temperature: Operating: 5°C (41°F) to 40°C (104°F)
Storage : -30˚C_ to +60˚C_
Altitude: Operating: 2000m; Storage: 10,000m
Relative Humidity: 80 for temperature up to 31˚C decreasing
linearly to 50% RH at 40˚C
Battery Type and Life: AA (2); 350 hours with NEDA 15F or IEC
R6
Safety: UL Listed; 61010B-1: For use in Over-Voltage CAT III,
600V environments
EMC Regulations: EN50081-1, EN50082-1
Polution Degree: 2
For indoor use only.
Battery Test and Replacement
Replace the batteries when touching the leads together no longer
turns on the continuity LED.
2xAA
Disconnect probes Do not
from Voltage over-tighten screws
WARRANTY
Congratulations! Your new instrument has been quality crafted according to
quality standards and contains quality components and workmanship. It has
been inspected for proper operation of all of its functions and tested by
qualified factory technicians according to the long-established standards of
our company.
Your instrument has a limited warranty against defective materials and/or
workmanship for one-year from the date of purchase provided that, in the
opinion of the factory, the instrument has not been tampered with or taken
apart.
Should your instrument fail due to defective materials, and/or
workmanship during this one-year period, a no charge repair or
replacement will be made to the original purchaser. Please have your
dated bill of sale, which must identify the instrument model number and
serial number and call the number listed below:
Repair Department /ATP – Amprobe, TIF, Promax
Miramar, FL 33025
Phone: 954-499-5400
Toll Free: 800-327-5060
Fax: 954-499-5418
Website: www.Amprobe.com
Please obtain an RMA number before returning product for repair.
Outside the U.S.A. the local representative will assist you. Above limited
warranty covers repair and replacement of instrument only and no other
obligation is stated or implied.
Miramar, FL
Tel: 954-499-5400 • Fax: 954-499-5418
www.Amprobe.com
P/N: A TP 0403C printed in
China