Amprobe PY-1A ACDC-Voltage-Tester - Manual (Page 10)

6
Humidity Max. 80% rel. H.
Height above sea level up to 2000 m (6562 ft)
Measurement Cat.
CATIII / 600V
Pollution Degree 2
Safety Standards IEC 61010, UL 61010, CSA
22.2 No. 61010
Weight
Approx. 50g (0.11 lb)
Dimension Approx. 150X32X26 mm
(5.9x1.3x1.0 in)
MAINTENACE
When using the instrument in compliance with the
instruction manual, no special maintenance is required.
Should operational problems occur during daily use, our
consulting service will be at your disposal, free of charge.
If functional errors occur after expiration of warranty,
the repairing of the tester should be performed only by
a Factory Authorized Service Center or by other qualified
instrument service personnel. The front panel and
case can be cleaned with a mild solution of detergent
and water. Apply sparingly with a soft cloth and allow
to dry completely before using. Do not use aromatic
hydrocarbons or chlorinated solvents for cleaning.
Do not attempt to repair this tester. It contains no user-
serviceable parts. Repair or servicing should only be
performed by qualified personnel.
TROUBLE SHOOTING
If the instrument fails to operate, check test leads, and
replace as necessary. Double check operating procedure
as described in this user’s manual.