Electrolux 78001KF-N - Manual (Page 21)

21
Cookware for induction cooking zones
Cookware material
3
Cookware for induction cooking zones is labelled as suitable by the
manufacturer.
Suitability test
Cookware is suitable for induction cooking, if …
• ... a little water on an induction cooking zone set to heat setting 9 is
heated within a short time.
• ... a magnet sticks to the bottom of the cookware.
3
Certain cookware can make noises when being used on induction cook-
ing zones. These noises are not a fault in the appliance and do not af-
fect operation in any way.
Bottom of the cookware
The bottom of the cookware should be as thick and flat as possible.
Pan size
Induction cooking zones adapt automatically to the size of the bottom
of the cookware up to a certain limit. However the magnetic part of
the bottom of the cookware must have a minimum diameter depending
upon the size of the cooking zone.
Cookware with a bottom with a diameter of less than 12cm is not suit-
able.
Tips on energy saving
2
Place cookware on the cooking zone before it is switched on.
2
If possible, always place a lid on the cookware.
Cookware material Suitable
Steel, enamelled steel yes
Cast iron yes
Stainless steel if appropriately labelled by the manufacturer
Aluminium, copper, brass ---
Glass, ceramic, porcelain ---