Amprobe TR100-A TR200-A Temperature-Humidity-Data-Loggers - Manual (Page 10)

9
12. Click to exit the program
- Click the “START” from main screen to download the memory from logger
SpECIFICATIoNS
Description TR100-A TR200-A
Temperature range -40 to 85°C(-40 to 185°f)
Humidity range n/A 0 to 100 %RH
Accuracy:
Temperature
± 0.6°C / 1°f (-20 to 50°C / -4 to 122°f),
±1.2°C / 1.2°f all others
Relative Humidity n/A
±3% (25°C, 10-90%),
±5% all others
Sample points 1K / 2K / 4K / 8K / 12k / 16K
Resolution:
Temperature 0.1°C / 0.1°f
Relative Humidity n/A 0.1%
LeD response Red: Hi, Lo Alarm; Yellow: Record
LCD Display 13 x 13 mm
Dimension 75 x 55 x 23 mm (2.95 x 2.16 x 0.9 in)
Housing ip65 ip54
TRoUBLESHooTINg
Cannot connect and the display won’t turn on
Ans: Make sure you have selected the correct baud rate. Select 9600 baud rate for all models.
Meter is programmed as Magnetic but could not start
Ans: Set up Magnet start in the Download Suite software. Use a magnet on the rear side of
the meter for more than 2 seconds, the logger should be activated and the ReC flashes. if not,
change a new and stronger magnet and try it again.