Amprobe IR-750 Infrared-Thermometer - Manual (Page 8)

3
�
Warning
• Do not stare into laser beam.
• Do not point laser directly at eye or indirectly off reflective surfaces.
• For use by competent persons only.
• Do not point laser directly at eye or indirectly off reflective surfaces.
• Replace the batteries as soon as the low-battery indicator appears.
• Verify the Tester’s operation by measuring on a known voltage source. Do
not use the thermometer if it operates abnormally.
• Do not operate the thermometer around explosive gas, vapor, or dust.
• To avoid a burn hazard or fire, know that reflective objects may be much
hotter than the indicated temperature reading.
• Do not leave the thermometer on or near objects of high temperature.
• If the thermometer is used in a manner not specified by this manual,
the protection provided by the thermometer may be impaired or may
result in hazardous laser radiation exposure.
�
Cautions
To avoid damaging the thermometer under measurement, protect them
from the following:
• EMF (electro-magnetic fields) from arc welders, induction heaters
• Static electricity
• Thermal shock (caused by large or abrupt ambient temperature changes —
allow 30 minutes for instrument to stabilize before use)
• Do not leave the thermometer on or near objects of high temperature
UNPACKING AND INSPECTION
Your shipping carton should include:
1 Thermometer (IR-750)
1 USB cable
1 K-type thermocouple probe
1 Carrying bag
1 Hard carrying case
1 9V battery (installed)
1 Users manual
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.