Amprobe FG2C-UA FG3C-UA - Manual (Page 17)

11
5. CMOS Output FG2C-UA FG3C-UA
Level 4Vpp ±1Vpp to 14.5Vpp 4Vpp ±1Vpp to 14.5Vpp
± 0.5Vpp adjustable ± 0.5Vpp adjustable
Rise or Fall Time ≤ 120ns ≤ 120ns
6. TTL Output
Level
≥ 3Vpp ≥ 3Vpp
Fan Out 20 TTL load 20 TTL load
Rise or Fall Time ≤ 25ns ≤ 25ns
7. VCF
Input voltage
0 to 10V ±1V(100:1) 0 to 10V ±1V(100:1)
Input Impedance 10k Ω ±10% 10k Ω ±10%
8. GCV
Output voltage
N/A 0 to 2VDC
9. Sweep Operation
Sweep/Manual
N/A Switch selector
Sweep Width N/A 100:1 ratio max. Varies with
FREQUENCY setting and RANGE
selected
Sweep Time N/A 0.5 Sec to 30 Sec adjustable
Sweep/Mode N/A Lin./Log. switch selector
10. Amplitude Modulation
Depth
N/A 0 to 100%
MODulation Frequency N/A 400 Hz(INT), DC to 1 MHz (EXT)
Carrier BW N/A 100 Hz to 3 MHz (-3dB)
EXT Sensitivity N/A ≤10Vpp for 100 % modulation
11. Frequency Modulation
Deviation
N/A 0 to ±5%
Modulation Frequency N/A 400Hz (INT), DC to 20 kHz (EXT)
EXT Sensitivity N/A ≤10Vpp for 10% modulation
12. Frequency Counter
Int./Ext.
N/A Switch selector
Range N/A 0.3 Hz to 3 MHz (5 Hz to 150 MHz EXT)
Accuracy N/A Time base accuracy ±1 count
Time base warm up N/A ±20 ppm (23°C ± 5°C) after 30 minutes
Resolution N/A The maximum resolution is 10 nHz for
1Hz and 1 kHz for 100MHz
Input Impedance N/A 1MΩ/150pf
Sensitivity N/A ≤ 35 mVrms (5Hz to 100MHz)
≤ 45 mVrms (100MHz to150MHz)
13.General
LED Display
N/A 6 digits; 7.6mm (.3 in) high
Power Source 115, 230VAC ±15%, 50/60Hz 115, 230VAC ±15%, 50/60Hz
Operation Environment Indoor use, Altitude up to 2000m.
Ambient Temperature 0°C to 40°C, Relative Humidity 80%(maximum).
Storage Temperature & Humidity -10 °C to 70°C @ 70% R.H.(maximum).
Accessories
1 each BNC to alligator clip coaxial lead, 2 each each BNC to
alligator clip Instruction Manual, Spare Fuse coaxial lead, Instruction
Manual, Spare Fuse
Dimension 243(w) x 93(H) x 292(D) mm
Weight Approx. 2.0 kgs. Approx. 2.2 kgs.