Amprobe ACD-10-Pro - Manual (Page 14)

13
DC Voltage: ACD-10 PRO/TRMS PRO
RANGE Accuracy
400.0mV
0.3% + 4d
4.000V, 40.00V,
400.0V
0.5% + 3d
600V 1.0% + 4d
NMRR : >50dB @ 50/60Hz
CMRR : >120dB @ DC, 50/60Hz, Rs=1k
Ω
Input Impedance : 10M Ω, 30pF nominal
(1000M Ω for 400.0mV range)
AC Voltage: ACD-10 PRO/TRMS PRO
RANGE Accuracy
1)
50Hz -- 500Hz
4.000V, 40.00V,
400.0V
1.5% + 5d
600V 2.0% + 5d
CMRR : >60dB @ DC to 60Hz, Rs=1k Ω
Input Impedance : 10M Ω, 30pF nominal
Max Hold (where applicable)
Specified accuracy ± 50 digits for changes >
25ms in duration
Audible Continuity Tester
Audible threshold : between 20
Ω and 120Ω.
Capacitance: ACD-10 PRO/TRMS PRO
RANGE* Accuracy**
500.0nF, 5.000
µF,
50.00 µF, 500.0µF,
3000 µF
3.5%*** + 6d
*Additional 50.00nF range accuracy is not
specified
**Accuracies with film capacitor or better
***Specified with battery voltage above 2.8V
(approximately half full battery). Accuracy
decreases gradually to 12% at low battery
warning voltage of approximately 2.4V
AC CURRENT: ACD-10 PRO/TRMS PRO
RANGE Accuracy
1)
50Hz / 60Hz
40.00A
1.9% + 8d
400.0A 1.9% + 8d*
600A** unspecified
*Accuracy specified to 350A continuous, and
400A for 60 second max with 5 minutes cool
down interval
**Added range to indicate instantaneous
over-range current values
OHMS: ACD-10 PRO/TRMS PRO
RANGE Accuracy
400.0
Ω 0.8% + 6d
4.000k Ω, 40.00kΩ,
400.0k Ω
0.6% + 4d
4.000M Ω 1.0% + 4d
40.00M Ω 2.0% + 4d
Open Circuit Voltage : 0.4VDC typical
Diode Tester: ACD-10 PRO/TRMS PRO
Open Circuit Voltage
Test Current
(Typical)
< 1.6 VDC 0.25mA
Hz Frequency: ACD-10 PRO/TRMS PRO
Function Sensitivity
(Sine RMS)
Range
400.0mV 150mV 10Hz -- 2kHz
4.000V 3.2V 5Hz -- 40kHz
40.00V 25V 5Hz -- 100kHz
400.0V 100V 5Hz -- 100kHz
600V 400V 5Hz -- 5kHz
400.0A 55A 40Hz -- 400Hz
Display counts: 5000
Best resolution: 0.001Hz
Accuracy: 0.5%+4d