Amprobe LP10B Logic-Probes - Manual (Page 9)

5
Maintenance
If there appears to be a malfunction during the operation of the Logic Probe, the following steps should be
performed in order to isolate the cause of the problem:
1. Review the operating instructions for possible mistakes in operating procedure.
2. Inspect and test the Test Cables for a broken or intermittent connection.
Any repair of the Logic Probe should be performed only by a Factory Authorized Service Center or by other
qualified instrument service personnel. The probe case can be cleaned with a mild solution of detergent and
water. Apply sparingly with a soft cloth and allow the Logic Probe to dry completely before using. Do not use
aromatic hydrocarbons or chlorinated solvents for cleaning.