AMK Innovations PT615 - Manual (Page 2)

Wire Connections
POWER SUPPLY WIRE CONNECTIONS BY MODEL SUFFIXES
PT - SM, OM, JFS, JFM, MDL PT – MD, CFS, CFM, RPS, RPM
12VDC Power 2.5 N Plug:
For N type power, use the schematics above for attaching wires,
paying close attention to polarity and position.
AUDIO CONNECTIONS BY MODEL SUFFIXES
PT-SM, RPS PT-OM, RPM PT-CFS, JFS
There are 2 RCA jacks on these models for
stereo to mono unbalanced RCA plug
connection.
One RCA jack on these models for one
unbalanced RCA plug connection.
4 position Phoenix type connector.
Stereo to mono unbalanced stereo audio to
unbalanced input.
PT-CFM, CFM2, CFM3, CFM4,
JFM, JFM2, JFM3, JFM4
PT – MD, MD2, MDL, MD2L Companion speaker
connection (suffix, -P)
3 position Phoenix type connector.
Unbalanced line audio to balanced input.
3.5mm stereo to mono
combined audio input
The weco-style connectors are wired using
red to red and black to black polarity
PT Series Illustration
The speaker comes
with one screw mount
power supply with the
eyebolt for securing
power supply to the
outlet.
24VDC Power Input :
Make sure that the polarity connection
matches ( + to + and – to -).