DE DIETRICH DWC170ZU - Manual (Page 6)

6
Fitting the plinth
Your appliance is delivered with a
transit brace, and a plinth is supplied.
1- Open the door.
2- Remove the transit bracket from
the door.
3- Unscrew the two screws to remo-
ve the transit brace.
4- Replace the two screws and was-
hers. Keep these parts carefully as
they may come in useful if you move
house with your appliance.
5- Use a bradawl or a nail to make
pilot holes for the plinth securing
screws.
6- Fit the plinth end into the space
provided for the hinge bracket.
7- Screw the plinth on.
Your appliance is delivered with the
door opening from left to right (hinges
on right). You can, if you wish, reverse
the door opening:
1- Unscrew the upper hinge, unhinge
and remove the door.
2- Remove the lower right hinge pin
and unscrew its support .
3- Unscrew and remove the plinth, if it
is already mounted.
4- Screw the support to the left side of
the door and replace the hinge pin.
Reversing the door opening
How to carry out your initial installation
2
3
5
1
2 4
99634231_C.qxd 28/09/2004 09:07 Page 6