Electrolux 67670KF-N - Manual (Page 22)

22
What to do if
…
Problem Possible cause Remedy
The appliance cannot be
switched on or is not oper-
ating More than 10 seconds have
passed since the appliance
was switched on Switch the appliance on
again.
The lock is switched on Switch off the lock (See
the section “Locking/un-
locking the control panel”)
The child safety device is
switched on Deactivate child safety de-
vice (See the section “Child
safety device”)
Several sensor fields were
touched at the same time Only touch one sensor field
Safety cut-out has been
triggered Remove any objects (pan,
cloths, etc.) that are lying
on the control panel.
Switch the appliance on
again
STOP+GO is activated Switching off STOP+GO
The residual heat indicator
is not displaying anything The cooking zone was only
on for a short time and is
therefore not hot If the cooking zone is sup-
posed to be hot, call your
local Service Force Centre.
The automatic warm up
function is not switching
itself on There is still residual heat
on the cooking zone Let the cooking zone cool
down
The highest heat setting is
set The highest heat setting
has the same power as the
automatic warm up func-
tion
Repeated acoustic signal
(6x), appliance switches off One or more sensor fields
have been covered for
longer than 10 seconds Uncover sensor field
Acoustic signal sounds
when appliance is switched
off The control panel is wholly
or partly covered by ob-
jects. Remove objects.
Acoustic signal sounds and
appliance switches itself on
and then off again; after 5
seconds another acoustic
signal sounds The On/Off sensor field has
been covered up, e.g. by a
cloth Do not place any objects
on the control panel