Electrolux LAVAMAT 62840 L - Manual (Page 7)

7 DISPLAY
8 START/PAUSE button
9 DELAY START button
10 Indicator pilot lights
Symbols : Rinse Hold, Cold
Display
7.2
7.3
7.1
Duration of selected programme (7.1) :
Duration of selected programme: After selecting a programme, the duration is displayed
in hours and minutes (for example 2.05 ). The duration is calculated automatically on the
basis of the maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero is displayed, the DOOR pilot light
( 10.2 ), the WASHING pilot light ( 10.1 ) and the pilot light of button 8 go out. The door
can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err is displayed for a few seconds and the yellow pilot light of button 8 light starts blinking.
Delay Start (7.2)
The selected delay (20 hours max) set by means of the relevant button appears on the
display for a few seconds, then the duration of the previously selected programme is dis-
played. The symbol 7.2 will appear on the display. The delay time value decreases by one
unit every hour. When only 1 hour remains, the time decreases every minute.
Display 7