DE DIETRICH DKP844 - Manual (Page 5)

Switching on
After plugging the plug into the power outlet,
appliance switches on.
As soon as the appliance is turned on, if it is in
alarm condition, reset the alarm as described in
"High temperature alarm".
Activate the Clock display as described in
"Displaying the clock".
Set the clock as described in "Setting the clock".
At first switching on:
• default fridge temperature setting is 5°C
• default freezer temperature setting is -18°C
You can change the temperature settings as
described in "Temperature regulation".
Switching off
To switch off the appliance remove the main plug.
Use of the refrigerator compartment
The temperature can be adjusted between +2°C and
+8°C.
During normal functioning the indicator shows the
temperature inside the fridge.
Attention!
Difference between the temperature displayed and
temperature setting is normal. Especially when:
- a new setting has recently been selected
- the door has been left open for a long time
- warm food has been placed in the compartment
Displaying the Clock
The Clock display is activated by pressing the Clock
switch.
It is possible to deactivate the Clock display at any time
by pressing the Clock switch.
Setting the Clock
The Clock function is activated by pressing and holding
the Clock switch:
• and will light up
• backlight switch on
While holding the Clock switch, press the Hour setting
regulator to advance the hours (hold button down for
continuous and fast advance). The pm indicator
will appear for times after midday.
While holding the Clock function, press the Minutes
setting regulator to advance the minutes (hold button
down for continuous and fast advance).
When the correct time is displayed, release Clock switch:
• and will light down
• backlight switch off
When Clock setting function is activated temperature
can not be regulated.
You must make new time setting after power failure.
During this time it is possible that the temperature
displayed is different than the setting temperature.
36