DE DIETRICH DKH876 - Manual (Page 6)

Door open alarm
If the door remains open for a few minutes,
the Alarm reset light will flash and an alarm
will sound.
1. Press the Door alarm reset switch to
switch off the Alarm sound.
2. Close the door and the Alarm reset light
will switch off.
Light switch and light indicator
If you would like the light to remain on, with
the door closed, it is sufficient to open and
close the door and the light will remain ON
automatically for 10 minutes.
If you want to switch off the light before the
automatic turn off time, open the door and
push thelight switch. The light indicator will
switch off. The light has no negative effect on
the quality on the wine.
Freezer Control panel
1 2 3 4 5 6 8
7 9
1 Pilot light
2 ON/OFF switch
3 Temperature regulator (warmest)
4 Temperature indicator
5 Temperature regulator (coldest)
6 Auto Freeze light
7 Auto Freeze switch
8 Alarm light
9 Alarm reset switch
Switching on
Insert the plug into the wall socket.
Press the ON/OFF switch .
The Pilot Light will light up.
Switching off
Keep ON/OFF switch pressed for more than
5 seconds.
After that, a countdown of the temperature
from -3 -2 -1 will be shown. When “1” ap-
pears the appliance is turned off. The tem-
perature indicator switches off. The Pilot light
switches off.
Temperature regulation
The temperature can be adjusted between
-15°C and -24°C.
By pressing the Temperature regulators , the
current temperature setting flashes on the
Temperature indicator. It is possible to mod-
ify the setting temperature only with flashed
indicator. To set a warmer temperature,
press warmest Temperature regulator . To
set a colder temperature, press coldest Tem-
perature regulator. The Temperature indica-
tor displays the newly selected temperature
for a few seconds and then shows again the
inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
Caution! During the stability period by
the first starting the temperature
displayed can not correspond to the
setting temperature.
Temperature indicator
During normal functioning the Temperature
indicator shows the temperature inside the
freezer.
Important! Difference between the
temperature displayed and temperature
setting is normal. Especially when:
• a new setting has recently been selected.
• the door has been left open for a long time.
• warm food has been placed in the com-
partment.
Auto Freeze function
You can activate the Auto Freeze function by
pressing the Auto Freeze switch.
The Auto Freeze light will light up.
6