DE DIETRICH DVF300JU2 - Manual (Page 10)

GB GB 17
Installing your dishwasher
Levelling by adjusting the feet
Ensure that your dishwasher is well
balanced and stable. The four feet can
be adjusted, so adjust them if necessary
using a screwdriver. If the feet are
poorly adjusted, this decentres the door
and makes your dishwasher wobble,
causing leaks.
For dishwashers that can be built-in,
fitted with rear feet adjustment via two
knurled knobs on the base of the
machine, at the front, use a screwdriver,
without exerting force, to finish the
adjustments to avoid damaging the
worktop.
Protecting the worktop
Glue the steam protector supplied with
your machine underneath your worktop.
Built-in appliance cup kit
(available according to the model from
After-Sales or the dealers)
To assist in sliding your dishwasher
(over rough or carpeted floors, etc.),
clip the little cups to all four feet.
Remove the 2 red
protective wedges from
the front of your appliance to
avoid causing a leak.
Pages
Installing your dishwasher ....................................16-22
Levelling by adjusting the feet .................................17
Anti-condensation protection ...................................17
Facing the door ......................................................18
Balancing the door .................................................18
Building in and fixing the dishwasher.......................18
Water connections ..................................................19
Draining away the waste water................................20
Electrical connection ...............................................20-21
Foam strip and soundproofing sea ...........................21
Installing the plastic corner brackets........................21
Safety instructions ...............................................22
Building in under a hob .........................................22
Contents
16