DE DIETRICH DTE1114X - Manual (Page 11)

10
TECHNICAL CHARACTERISTIC TABLES
BURNERS
GAS
NORMAL
PRESSURE
NOMINAL
RATE
INJECTOR
DIAMETER
TAPE BY
PASS
DIAMETER
NOMINAL
HEAT INPUT
(W)
N° DESCRIPTION mbar g/h L/h 1/100 mm 1/100 mm Max. Min.
1 RAPID
G30 / G31 28 - 30 / 37 225 - 85 42 3000 950
G20 20 - 290 115Y Reg. 3000 950
2 SEMI-RAPID
G30 / G31 28 - 30 / 37 126 - 65 31 1750 600
G20 20 - 165 97Z Reg. 1750 600
3 AUXILIARY
G30 / G31 28 - 30 / 37 71 - 50 27 1000 450
G20 20 - 99 72X Reg. 1000 450
4
TRIPLE
CROWN
G30 / G31 28 - 30 / 37 278 - 98 60 3800 2100
G20 20 - 367 135K Reg. 3800 2100
The manufacturing firm refuses all responsibility for any possible imprecision in this booklet, due
to misprints or clerical errors. It reserves the right to make all the changes that it will consider
necessary in its own products, without effecting the essential characteristics of functionality and
safety.
This product complies with EU Directive 2002/96/EC.
The crossed-out dustbin symbol reported on the appliance indicates that the appliance
must be disposed of separately from other domestic refuse at the end of its useful life.
It must therefore be delivered to a waste recycling centre specifically for electric and
electronic equipment or returned to the retailer at the moment of purchase of a new
equivalent appliance.
The user is responsible for delivering the appliance to the appropriate collection centre at the end of its
useful life, Failure to do so may result in a fine, as provided for by laws governing waste disposal.
Differential collection of waste products for eventual recycling, treatment and environmentally friendly
disposal helps reduce possible negative effects on the environment and health, and also enables the
materials making up the product to be recycled.
For more detailed information on the available refuse collection systems, refer to the local Municipal Solid
Waste disposal centre or the shop where the product was purchased.
Producers and importers are responsible for fulfilling their obligations as regards recycling, treatment and
environmentally friendly disposal by directly or indirectly participating in the collection system.