DE DIETRICH DTi1049Х - Manual (Page 14)

Help Guide EN
11
Posssible Causes What should you do?
A special code / display ap­
pears across the ccontrol panel
Working normally Nothing this code will turn off
after 30 seconds or if the zone is
turned on
Your installation blows a fuse
/ trip Incorrect electrical connec-
tion Check electrical supply connection
Only 1 side of the appliance works Incorrect electrical connec-
tion
Check electrical supply connection
The hob produces an odour
during the first cooking ses­
sions New appliance Nothing. The smell will disapear
with use.
Problems on installation
Problems after switching on
You observe that Possible causes What should you do?
The hob does not operate and
there are no indicator lights
on the display. The machine is not switched
on or correctly connected to
the power supply. Check electrical supply, mains
switches / circuit breaker /
fuses
The hob is not working and an
“F” code is displayed (Excep­
tion of “F7” shown on next
section) The appliance has detected a
fault Call the after sales service
department
The hob does not function
and displays the lock symbol The hob is locked Please refer to child lock fea­
ture.