Eureka 79 SERIES - Manual (Page 3)

GENERAL INFORMATION
The cordless vacuum cleaner is the answer for quick, convenient, and easy cleanups.
Grab the cleaner for little tasks rather than using a larger cleaner. Place the wall bracket
in any area of easy access that allows versatile cleaning of kitchen crumbs, window
sills, or steps. Always store the cleaner in the wall bracket to provide a ready charge.
Charge for 14-16 hours before first use.
Batteries could lose charge in shipping.
It is best to charge the batteries when temperatures are between 32° F (0°C) and 104°F
(40 C). Other temperatures could damage batteries.
While charging, the charger may become warm to the touch. This is a normal condition
and does not indicate a problem.
Important Battery Disposal Information
Nickel-Cadmium Batteries
NOTE: Remove the battery pack only when the batteries no longer hold a charge
and you plan to dispose of them.
Service Information
The instructions in this booklet serve as a guide to routine maintenance. If additional
service is required, telephone toll free:
USA: 1-800-282-2886
Mexico: (55) 5343-4384
Canada: 1-800-282-2886
DO NOT OIL. The motor has lubrication and has a permanent seal.
Rating Plate
The model number is indicated on the rating plate
which is located on the underside of the vacuum
cleaner. For prompt and complete service, always
refer to these numbers:
Model and Type No.______________________
Serial No. or Date Code___________________
ELECTROLUX HOME CARE PRODUCTS
NORTH AMERICA
Bloomington, Illinois 61701 USA
MODEL
HOUSEHOLD TYPE
4
The RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd)
battery indicates The Eureka Company is voluntarily participating
in an industry program to collect and recycle these batteries at
the end of their useful life, when taken out of service in the United
States or Canada. The RBRC program provides a convenient
alternative to placing used Ni-Cad batteries into the trash or the
municipal waste system, which is illegal in some areas. Please
call 1-800-8-BATTERY for information on Ni-Cd battery recycling
in your area.
for the nearest Eureka Authorized Warranty Station. If you prefer, you can write to Electro-
lux Home Care Products North America, Service Division, P.O. Box 3900, Peoria, IL
61612. In Canada write to Electrolux Home Care Products North America, 5855 Terry
Fox Way, Mississauga, Ontario L5V3E4. Refer to The Eureka Warranty for complete
service information.
Dust
Cup
Crevice Tool
(On the back)
5
Identify Parts
Socket
Charger
Wall Mount
Bracket
Screws and
Cavity Wall
Anchors Motor
Filter
Dust Cup
Latch On/Off
Switch
Charger Plug
USING THE VACUUM CLEANER
1. To switch on, move the on/off switch forward toward the dust container.
2. To switch off, move the on/off switch backward toward the handle.
To Use the Crevice Tool
1. Locate crevice tool on the bottom of the cleaner.
2. Grasp the end of the crevice tool nozzle and rotate out until it stops.
3. Then push the crevice tool firmly into the end of the cleaner nozzle.
4. After use, to store crevice tool pull the crevice tool out from the cleaner
nozzle.
5. Rotate back into the bottom of the cleaner until it snaps into place.
End of the
crevice tool
nozzle.