beautypg.com

Technical specifications, Cleaning & changing the post motor filter, Trouble shooting guide – Euro-Pro BIG SHARK EP134 User Manual

Page 3: Getting to know your big shark

background image

1.

Push the Filter Cover Lock

to open the filter cover.

2.

Remove the filter from the

grill-filter.

3.

Rinse filter in lukewarm water

and dry the filter completely.

4.

Put the filter into the grill-filter.

5.

A severely solid or clogged filter

should be thoroughly washed

with fresh tepid water. A mild

detergent can be used if required.

1. Disconnect from electrical outlet

before cleaning the filter.

2. Filter should be cleaned at least twice

a year or when it becomes visible

solid.

3. Always operate the cleaner with the

filter installed.

4. Do not use a washing machine to

rinse the filter.

5. Do not use a hair dryer to dry it.

CLEANING & CHANGING THE POST MOTOR FILTER

PROBLEM

POSSIBLE REASON

POSSIBLE SOLUTION

HAND VACUUM

WILL NOT

OPERATE

1. Power cord not firmly plugged

into outlet.

2. No power in wall outlet.

3. Needs

servicing.

4. Thermostat

has

tripped.

1. Plug unit in firmly.

2. Check fuse or breaker.

Replace fuse/reset breaker.

3. Call

1-800-798-7398.

4. Turn the unit off and unplug

from outlet.

HAND VACUUM

WILL NOT PICK-UP

OR SUCTION

POWER IS WEAK

1.

Dust cup s full.

2. Unit

clogged.

3. HEPA Dust Cup Filter needs

cleaning or replacing.

1. Allow unit to cool down,

then Restart. Empty dust

cup – (see page 4).

2. Turn unit off and unplug

from wall outlet. Remove

HEPA Dust Cup Filter and

check for object(s) in air

duct and remove.

3. Clean

or

replace

HEPA

Dust Cup Filter.

(see page 4)

DUST ESCAPING

FROM HAND

VACUUM

1.

Dust cup is full.

2. HEPA Dust Cup Filter is not

installed correctly.

3. There is a puncture/hole in

HEPA Dust Cup Filter.

1. Empty

dust

cup.

2. Review HEPA Dust Cup

Filter instructions.

(see page 4)

3. Replace HEPA dust cup

filter. (see page 4)

HAND VACUUM

HOSE OR

BRUSHES WILL

NOT PICK-UP

1. Hose

clogged.

2.

Dust cup is full.

1. Remove hose and/or

bushes. Remove obstruction

from hose.

2. Empty and clean dust cup.

TROUBLE SHOOTING GUIDE

5

GETTING TO KNOW YOUR BIG SHARK

2

Technical Specifications

Voltage:

115V., 60Hz.

Power:

7.8 Amps, 900 Watts

8.

Oval Brush

9.

Holes for Attaching the Shoulder Strap

10. Dust Cup (Container)

11. Flexible Hose

12. Crevice Tool

13. Hepa Dust Cup Filter

1. Push to Open Dust Cup (Container)

2. On/Off Power Switch

3. Suction Hole

4. Handle

5. Exhaust Cover Lock

6. Exhaust Cover

7. Shoulder Strap

9

HEPA Filter

Debris Screen

11

7

8

12

10

13