Operation, Temperature control – EdgeStar Upright Freezer User Manual
Page 2

2
loaded than when empty. 
In order to prevent vibration and noise, the freezer 
should be leveled by adjusting the front leveling 
legs. 
Please note that this appliance is designed for 
“free-standing” use only. Choose a well ventilated 
location with at least 2-3 inches of clearance 
around the appliance. 
Locate the appliance out of direct sunlight and 
away from heat sources such as an oven or boiler. 
For your safety, please read the following 
nformation
i
 
Warning: This appliance must be installed on a 
circuit that is grounded. 
 
Operation 
Before plugging in your freezer for the first time 
remove all packaging, clean the freezer with a soft 
rag and a mixture of lukewarm water and baking 
soda (2 tablespoons baking soda in 1 quart of water 
orks well) . Wipe dry with soft cloth.
w
 
Temperature Control 
The temperature in the appliance is controlled by 
the thermostat control knob located in the lower 
section. Turn the thermostat control knob to 
regulate the temperature inside the unit. The knob 
has markings to indicate the relative temperature 
settings, but in general, turning the knob 
