Electrolux LAVAMAT 52810 - Manual (Page 14)

14
Activating/deactivating RINSE+
If RINSE+ is activated, two additional rinse cycles take place with the
programmes COTTONS/LINEN, EASY-CARES/EASY IRON, DELICATES and
RINSE. RINSE+ remains permanently saved – even after the appliance
has been switched off.
Activating RINSE+:
1. Turn the programme selector to COTTONS/LINEN, EASY-CARES/EASY
IRON or DELICATES (with the temperature of your choice).
2. Simultaneously press and hold the PRE WASH and DELAY TIMER but-
tons until RINSE and RINSE+ are illuminated on the programme
progress display. RINSE+ has now been permanently activated.
Prior to the start of a programme RINSE+ is illuminated in the pro-
gramme progress display and while the additional rinse cycles are being
performed.
Deactivating RINSE+
1. Turn the programme selector to COTTONS/LINEN, EASY-CARES/EASY
IRON or DELICATES (with the temperature of your choice).
2. Simultaneously press and hold the PRE WASH and DELAY TIMER but-
tons until RINSE+ goes out on the programme progress display. RINSE+
is now permanently deactivated.
Setting the delay timer
The DELAY TIMER button allows you to delay the start of a programme.
1. Select the programme.
2. Press the DELAY TIMER button once if the wash programme is to start
in 6 hours. The 6h indicator will illuminate.
Press the DELAY TIMER button twice if the wash programme is to start
in 3 hours. The 3h indicator will illuminate.
3
If you press the DELAY TIMER button again, the delay timer will be can-
celled. The indicator will go out.
3. To activate the delay timer, press the START/PAUSE button.
Note: If a time delay of 6 hours is selected, the 6h indicator will illumi-
nate. After 3 hours the display will switch and 3h will be illuminated.
After a total of 6 hours the wash programme will then start.