EnGenius Technologies ESR-9710 - Manual (Page 5)

Quick Start Guide Wireless N Gigabit Router
Quick Start Guide v.1.0 ESR-9710 Wireless N Gigabit Router 5
1. If you select the Auto option, then the device will automatically configure the SSID and security
mode.
2. Click on the Next button to continue.
3. The wizard has automatically configured the SSID and security mode for the device. Click on the
Save button to complete the setup.
Manual Network Setup
1. If you select the Manual option, then you will be required to specify the SSID and select the
appropriate network security.
2. Click on the Next button to continue. The wireless wizard will inform you that there are three major
steps in the process. name your wireless network, secure your wireless network and set your
wireless security password
3. Click on the Next button to continue.
4. Specify the Wireless Network Name (SSID) for the device.
5. Click
on the Next button to continue.
6. This step requires that you configure the security features based on your needs. The following
options are available.
a. BEST – Select this option if your wireless adapters support WPA2
b. BETTER – Select this option if your wireless adapters support WPA
c.
GOOD – Select this option if your wireless adapters do not support WPA, but supports
WEP instead
d. None: Select this option if you do not want to activate any security features.
7. Select a level of security and then click on the Next button to continue.
8. If you do not want to setup security, then select the NONE radio button.
Wireless Security Level: BEST (WPA2)
1. Select the BEST radio button which supports WPA2 encryption. Then click on the Next button.
2. Enter a security password between 2 and 20 characters then click on the Next button.
3. The setup is complete. Click on the Save button and then reboot the device.
Wireless Security Level: BETTER (WPA)
1. Select the BETTER radio button which supports WPA encryption. Then click on the Next
button.
2. Enter a security password between 2 and 20 characters then click on the Next button.
3. The setup is complete. Click on the Save button and then reboot the device.
Wireless Security Level: GOOD (WEP 64/128-bit)
1. Select the GOOD radio button which supports WEP encryption. Then click on the Next button.
2. Enter a security password between 2 and 20 characters then click on the Next button.
3. The setup is complete. Click on the Save button and then reboot the device.
Wireless Security Level: None (Security Disabled)
1. Select the NONE radio button if you do not want to activate any security features. Then click
on the Next button.
2. The setup is complete. Click on the Save button and then reboot the device.
The configuration of the router is complete. You can now securely connect to the Internet. For advanced
configuration, refer to the User’s Manual in the CD-ROM provided.