SAF-HOLLAND XL-FW306-01 3500 INCLUDES AIR RELEASE - Manual (Page 4)

1. Position tractor and trailer in a straight line on
level ground.
2. Lock the trailer brakes.
3. Release slide locking plungers.
4. Visually check that both plungers are fully
extended, as shown in Figure 4a.
Note: If the plungers do not release, raise the trailer
to relieve pressure on the plungers. This will allow the
fifth wheel to slide easier.
The trailer must be stopped and the
trailer brakes locked to prevent
damage to the tractor or trailer by uncontrolled sliding
of the fifth wheel.
Do not operate the vehicle if the
plungers are not fully engaged and
landing gear fully retracted, as damage to the tractor,
trailer and landing gear may occur.
5. Slowly drive the tractor forward or backward to
position the fifth wheel.
6. Re-engage the slide locking plungers. Verify that
both plungers have fully engaged.
Note: Retract landing gear if lowered.`
Figure 4a Figure 4b
UNLOCK LOCK
TAP
DOWN
Trip the release lever by
tapping it downward as shown
and allowing it to spring back.
Move cab switch to
lock position.
AIR OPERATED MANUAL SLIDE
4 XL-FW306-01
Copyright ® June 2002 • The Holland Group, Inc.
Holland USA, Inc. Facilities:
Denmark, SC Muskegon, MI
Dumas, AR Warrenton, MO
Holland, MI Whitehouse Station, NJ
Milpitas, CA Wylie, TX
Ph: 888-396-6501 Fax: 800-356-3929
Holland International, Inc.
Holland, MI
Phone:
616-396-6501
Fax: 616-396-1511
Holland Equipment, Ltd.
Norwich, Ontario • Canada
Phone:
519-863-3414
Fax: 519-863-2398
Holland Hitch Western, Ltd.
Surrey, British Columbia • Canada
Phone:
604-574-7491
Fax: 604-574-0244
Holland Hitch of Canada, Ltd.
Woodstock, Ontario • Canada
Phone:
519-537-3494
Fax: 800-565-7753
FIFTH WHEEL SLIDE ADJUSTMENT:
UNLOCK LOCK
AIR OPERATED MANUAL SLIDE
Move cab switch to
unlock position.
Pull release lever,
lift up and hook in place.