beautypg.com

Troubleshooting problem, Problem – SAF-HOLLAND XL-FW428-01 FW2800 Series Hydraulic Elevating Fifth Wheels User Manual

Page 12

background image

12

SAF-HOLLAND, Inc. XL-FW428-01 Rev A

TROUBLESHOOTING

PROBLEM:

Will not lift.

POSSIBLE CAUSE

SOLUTION

Insufficient oil .............................................. Check oil level. The tank should contain 4˝ of oil in the

down position. If low, add oil.

PTO not engaged ........................................ Engage the PTO. Check the shifter for

proper operation.

Engine r.p.m. too low .................................. Increase to 1,000 to 1,200 r.p.m.

Control valve ............................................... Check for full throw.

Load exceeds capacity ................................. Reduce the weight of the trailer.

Flow restriction ............................................ Check for ruptured or collapsed hoses; check oil filter;

clear the lines.

Pump is losing prime ................................... Raise the oil tank and/or line above the pump inlet.

Pump is running hot .................................... PTO left in gear; disengage when not in use.

Oil foaming (contains air) ........................... Tighten all fittings and check for leaks.

PROBLEM:

Raises or lowers slowly.

POSSIBLE CAUSE

SOLUTION

PTO not engaged ........................................ Engage the PTO.

Engine r.p.m. too low .................................. Increase to 1,000 to 1,200 r.p.m.

Control valve ............................................... Check for full throw.

Incorrect pressure ........................................ Raising pressure circuit should be 1,800 p.s.i.; lowering

circuit pressure should be 150 p.s.i.

Flow restricted ............................................. Check for ruptured or collapsed hoses, check oil filter,

clear lines.

PROBLEM:

Oil tank is overflowing.

POSSIBLE CAUSE

SOLUTION

Too much oil in the system ......................... Check oil level. Tank should contain 4˝ of oil in the

down position.

Oil foaming (contains air) ........................... Tighten all fittings and check for leaks.

This manual is related to the following products: