beautypg.com

Maintenance procedures – SAF-HOLLAND XL-FW10017OM Simplex SE and II SE Series Fifth Wheels User Manual

Page 14

background image

14

XL-FW10017OM-en-US Rev A 1110 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.

Figure 20

Figure 21

AUTOMATIC
INDICATOR

MANUAL
INDICATOR

1. If

fifth

wheel

is

locked, pull release

handle all the way out, then lift han-
dle up and hook on casting. (If
equipped with a manual safety
indicator, the indicator must be
manually rotated out of the way
before pulling release handle.) If air
release equipped, actuate fifth wheel
control valve to open lock (

Figure 20

).

2.

Ram lock tester into fifth wheel top
plate to lock fifth wheel (

Figure 21

).

3.

Push the lock tester forward so that it
is tight against the fifth wheel’s front
lock. Ensure the lock tester is
pressed flat against the surface of the
fifth wheel. Scribe a line on the sur-
face of the fifth wheel face along
front edge of lock tester (

Figure 22

).

4.

Pull lock tester toward fifth wheel
ramps. Ensure the lock tester is
pressed flat against the surface of the
fifth wheel. Scribe a second line on
the surface of the fifth wheel face
along front edge of lock tester (

Figure

23

).

Figure 22

Figure 23

FIFTH WHEEL

FRONT LOCK

SCRIBE FIRST LINE

SCRIBE SECOND LINE

Maintenance Procedures