SAF-HOLLAND XL-FW10049OM AL Aluminum NoLube Series Fifth Wheels - Manual (Page 10)

10
XL-FW10049OM-en-US Rev A 11-10 Amendments and Errors Reserved. © SAF-HOLLAND, Inc.
Operation Instructions
13. If you do not achieve a proper couple,
repeat the coupling procedure.
Failure to properly couple
the tractor and trailer may
result in tractor trailer
separation while in use
which, if not avoided,
could result in death or
serious injury.
Failure to repair a
malfunctioning fifth wheel
before use may result in a
tractor trailer separation
which, if not avoided,
could result in death or
serious injury.
14. Fully retract the landing gear legs off
the ground and secure the crank
handle (Figure 15).
15. Verify brake lines and light cords are
connected.
16. Remove wheel chocks, continue with
pre-trip inspection.
7. Uncoupling Procedures
Failure to follow all of the
procedures contained in
these uncoupling
instructions may result in
damage to the lube plates.
Figure 15
IMPORTANT: Do not use any fifth wheel
that fails to operate properly.
NOTE: Follow instructions published by
landing gear manufacturer for
proper operation of landing gear.
SECURE
CRANK
IMPORTANT: Following uncoupling
procedures for FWAL
NoLube fifth wheels is
extremely important.