SAF-HOLLAND XL-PH10409UM PH-419 Series Rigid Type Pintle Hook - Manual (Page 2)

2
XL-PH10409UM-en-US Rev C · 2012-08-03 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Contents
Contents Page
Introduction ..............................................2
Warranty ...................................................2
Notes, Cautions, and Warnings ..................2
Important Safety Instructions ....................3
Exploded View ..........................................4
Parts List ..................................................5
Mounting Structure Chart .........................5
Dimensions ...............................................5
Section 1 – Drawbar Eye Dimensions.........6
Section 2 – Load Ratings per SAE J847 ......6
Section 3 – Towing Applications ................6
Contents Page
Section 4 – Installation Options ................7
Section 5– Pintle Hook Only
Mounting
Instructions .........................7
Section 6 – Pintle Hook, Air Chamber with
Bracket Mounting Instructions .............8
Section 7 – Pintle Hook, Air Chamber
without Bracket Mounting Instructions .... 10
Section 8 – Plunger Adjustment .............. 12
Section 9 – Operating Instructions .......... 13
Section 10 – Maintenance ....................... 14
Section 11 – Replacement Latch Kit ........ 15
Introduction
This manual provides information necessary
for the proper mounting, operation, maintenance,
and inspection of the SAF HOLLAND pintle hook.
NOTE: For Holland replacement
components contact
SAF-HOLLAND Customer
Service: 1-888-396-6501.
Warranty
This product is covered by SAF-HOLLAND’s
Coupling Products Commercial Warranty. Refer
to the complete warranty for the country in
which the product will be used. A copy of the
written warranty can be downloaded from our
SAF-HOLLAND website (www.safholland.us).
Notes, Cautions, and Warnings
You must read and understand all of the
procedures presented in this manual before
starting any work on the pintle hook.
NOTE: In the United States, work shop
safety requirements are defined by
federal and/or state Occupational
Safety and Health Act. Equivalent
laws may exist in other countries.
This manual is written based on
the assumption that OSHA or other
applicable employee safety
regulations are followed by the
location where work is performed.
Proper tools must be used to perform the
mounting and maintenance procedures
described in this manual.
Throughout this manual, you will notice the
terms “NOTE”, “IMPORTANT”, “CAUTION”, and
“WARNING” followed by important product
information. So that you may better understand
the manual, those terms are as follows:
NOTE: Includes additional information
to enable accurate and easy
performance of procedures.
IMPORTANT: Includes additional
information that if
not followed could
lead to hindered
product performance.
Used without the safety alert
symbol, indicates a potentially
hazardous situation which,
if not avoided, may result
in property damage.
Indicates a potentially
hazardous situation which,
if not avoided, may result
in minor or moderate injury.
Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.