SAF-HOLLAND XL-PH10399OM EH-3050 Series E-Hitch - Manual (Page 2)

XL-PH10399OM-en-US Rev B · 2013-04-10 · Amendments and errors reserved. © SAF-HOLLAND, Inc. 2
Contents
Introduction
This manual provides the information necessary
for the proper operation and maintenance
of the SAF-HOLLAND EH-3050 E-Hitch.
Towing Applications
Designed for airport ground support and
industrial material handling applications. This
product is not approved by SAF-HOLLAND
for over-the-road use.
NOTE: SAF-HOLLAND reserves the right,
without giving prior notice,
to change specifications and
dimensions as designs are
altered or improved.
IMPORTANT: Keep this manual in
a safe location for
future reference.
Notes, Cautions, and Warnings
You must read and understand all of the
procedures presented in this manual before
starting any work on the E-Hitch.
Proper tools must be used to perform the
maintenance and repair procedures described
in this manual.
NOTE: In the United States, workshop
safety requirements are defined by
federal and/or state Occupational
Safety and Health Act. Equivalent
laws may exist in other countries.
This manual is written based on
the assumption that OSHA or
other applicable employee safety
regulations are followed by the
location where work is performed.
Contents Page
Introduction ..............................................2
Towing Applications ..................................2
Notes, Cautions, and Warnings ..................2
Section 1 – General Safety Instructions .....3
Section 2 – Dimensional Layout and
Parts Identification ..................3
Section 3 – Design and Performance
Specifications .........................4
Contents Page
Section 4 – Model Identification................4
Section 5 – Installation Instructions ..........5
Section 6 – Operating Instructions ............7
Section 7 – Converting Handle ..................8
Section 8 – Maintenance Procedures .........9
Section 9 – Repair Kits and
Ordering Information ............ 11
Throughout this manual, you will notice the
terms “NOTE”, “IMPORTANT”, “CAUTION”,
and “WARNING” followed by product
information. So that you may better
understand the manual, those terms are
defined as follows:
NOTE: Includes additional information
to enable accurate and easy
performance of procedures.
IMPORTANT: Includes additional
information that if
not followed could
lead to hindered
product performance.
Used without the safety
alert symbol, indicates
a potentially hazardous
situation which, if not
avoided, may result in
property damage.
Indicates a potentially
hazardous situation
which, if not avoided,
may result in minor or
moderate injury.
Indicates a potentially
hazardous situation which,
if not avoided, could result
in death or serious injury.