SAF-HOLLAND XL-TG10150UD TL and TG Series Liftgates - Manual (Page 15)

15 XL-TG10150UD-en-US Rev B · 2013-05-23 · Amendments and errors reserved. © SAF-HOLLAND, Inc.
Figure 21
Figure 22
Liftgate Operation Instructions
9. Platform Loading
Failure to keep load within platform edge
could create a crush hazard which, if not
avoided, may result in damage to the load.
Failure to keep loads stable and within
design capacity could result in falling objects
or component failure which, if not avoided,
could result in death or serious injury.
When riding the platform, failure to keep
feet within front edge of platform could
create a crush hazard which, if not avoided,
could result in death or serious injury.
9.1. Cart Stop Operation (TL Only)
NOTE: The TL cart stops are divided into curbside and
roadside halves of the platform. To raise all the
cart stops, both triggers must be rotated.
1. To raise the cart stops, fully rotate both the curbside and
roadside triggers (Figure 21).
2. To lower the cart stops, fully rotate both curbside and
roadside triggers until the cart stops are flush with the
platform (Figure 22).
Failure to keep load within platform edge
could create a crush hazard which, if not
avoided, may result in damage to the load.
TRIGGER
CART STOPS
ROADSIDE TRIGGER
CURBSIDE TRIGGER
TRIGGER
CART STOPS
ROADSIDE TRIGGER
CURBSIDE TRIGGER