Subaru Robin RGV12100 - Manual (Page 27)

24
(4) CIRCUIT TESTER
Used for measuring resistance, etc.
(5) MEAGER TESTER
Used for measuring generator insulation
resistance.
Select one with testing voltage range of
500V.
7-2 AC OUTPUT MEASURING
SWITCH
LOAD
TO AC RECEPTACLE F
A
~
V
~
Use a circuit above for measuring AC output. A hot plate or lamp with a power factor of 1.0
may be used as a load. Adjust the load and rpm. and check that the voltage range is as speci-
fied in the following table at the rated amperage and rated rpm.