Subaru Robin EA190V - Manual (Page 35)

32
4-3-7 Throttle control
NOTICE
·Don’t randomly replace throttle valve returning spring, and governor spring hooking position or
result in performance of the engine unstable.
Governor spring hook position ：
shown as figure
.
Lever rubber sleeve
Bolt M6×12
Throttle control
Governor lever(insert the
left end into throttle valve
shaft hole）
Returning spring (hook the left end
into the throttle shaft small hole
)
Choke lever (hook the
left end into the choke
shaft hole.
Governor
support
Hex. Flange nut M6
Governor
spring
Support fix bolt
Engine stop switch
Bolt M6×12
Connect the engine
stop switch line to
crankcase while the
other end connects
to
engine stop
switch.
Fuel switch seat Fuel switch