beautypg.com

Overview – Ecom Instruments Malux i.roc 420 User Manual

Page 4

background image

Three model types, 420, non-incendive
520 -Ex and intrinsically safe 620 -Ex with Ex
certifications available

Based on HP iPAQ technology

Available operating systems are Windows
Mobile 2003 SE, compatible to WM 2003 PE
or Microsoft Windows Mobile 5, using
state-of-the-art Microsoft technology
for future projects

Onboard WLAN (802.11b) chip with a
range of up to 300m (985’), enable access to
data wherever and whenever. IEEE 801.1x
compliant, WEP, TKIP, PSK, Cisco Leap,
WPA, WPA2 (Funk Odyseey Client),
DSSS modulation type, country specific
use of frequency bands between 2.400 GHz
and 2.497 GHz, 100 mW TX power, WECA
Wi-Fi, UL, CSA, ANATEL, CE specified

Integrated Bluetooth class II chip (1 mW
TX power) with a range up to 10m (33’).
Supports the most common Bluetoothpro-
files like ActiveSync, A2DP(Advanced Audio
Distribution Profile), AVRCP(Audio Video
Remote Control Profile), BIP (Basic Imaging
Profile),BPP(Basic Printer Profile), DUN(Dial-
Up Networking), FTP(File Transfer Protocol),
GAP(Generic Access Profile), HFP(Hands
Free Profile), HCRP(Hard Copy Replace-
ment Profile), HSP(Headset Support Profile),
HQA(High Quality Audio), HID(Human
Interface Device Profile), LAP(LAN Access
Profile), OBEX(Object Exchange Profile),
OPP(Object Push Profile), PAN(Personal
Area Network), SPP(Serial Port Profile),
SDAP(Service Discovery Application Profile)

Overview

Software package included, AutoInstall,
Pre-Config Tool, AutoBackup/Restore
with System monitoring, Kiosk mode,
virtual fullscreen keyboard

Program other infrared enabled devices using
IrDA / SIR / FIR with up to 4Mbit/sec

Highspeed USB 2.0 connection to a standard
desktop PC via Dockingstation DS x10

Internal serial RS232 interface for connecting
optional read/write modules or communication
modems

RFID read / write modules for different
frequencies like 125 kHz / 134 kHz / 13.56 MHz

Modules for collecting barcodes using
1D Barcode Laser or 2D Barcode Imager

Development of customer specific modules